0
0

NotHot Cold Solder Cable Connector

Product Advantages: • Low resistant electrical connection without welding or heat involved. Uses a magnet and conductive epoxy.• Fits to any sized pipeline.• Avoids potential damage if plastic pipe insertion is unknown.• Can be used when pipe wall thickness is thin.• No risk of ignition in high risk combustible environments.• Keyhole compatible installation using the NotHot keyhole applicator tool• Low profile connection on pipeline reduces risk of soil stress damage to the connection.• Compatible with a variety of coating patch products.• Coating can be immediately applied at time of installation. The 2-part conductive epoxyapplied under the magnet cures even after external coating patch is applied. Product Configuration: The NotHot system consists of a pre-manufactured metal “saddle” provided with a factory attached wire and embedded neodymium magnet.  The product is offered in three configurations: Double Test Lead Kit – Includes 2/each magnetic saddles with 20 feet of #12 AWG solid wire, HMWPE insulation, 1/each, 2-part conductive epoxy kit (for 2 saddles) #4 Current Connection Kit - Includes 1/each magnetic saddle with a crimp connector for #4 AWG cable (supplied separately), 1/each, 2-part conductive epoxy kit (for 1 saddle) #6 Current Connection Kit - Includes 1/each magnetic saddle with a crimp connector for #6 AWG cable (supplied separately), 1/each, 2-part conductive epoxy kit (for 1 saddle) A Keyhole Applicator Tool is sold separately for use when installing the NotHot connector in a keyhole pipeline excavation. Easy Installation The NotHot connector is installed on prepared pipeline surface, which must be clean, bare metal.  The conductive epoxy is applied to the connector, which is placed on the pipeline surface.  The provided magnet holds the connector in place on the pipeline while the conductive epoxy dries.  The NotHot is a unique and effective way to install cathodic protection test lead wires or current carrying wires to a steel pipeline. 

Created by: Pipeline Corrosion Control

Last updated 11/2025

Explore Related topics

Consultancy Countries CPN Proceedures Engineering Gallery Manufacturing Research & Development Software Development Suppliers Training Universities

Description

Product Advantages: • Low resistant electrical connection without welding or heat involved. Uses a magnet and conductive epoxy.• Fits to any sized pipeline.• Avoids potential damage if plastic pipe insertion is unknown.• Can be used when pipe wall thickness is thin.• No risk of ignition in high risk combustible environments.• Keyhole compatible installation using the NotHot keyhole applicator tool• Low profile connection on pipeline reduces risk of soil stress damage to the connection.• Compatible with a variety of coating patch products.• Coating can be immediately applied at time of installation. The 2-part conductive epoxyapplied under the magnet cures even after external coating patch is applied. Product Configuration: The NotHot system consists of a pre-manufactured metal “saddle” provided with a factory attached wire and embedded neodymium magnet.  The product is offered in three configurations: Double Test Lead Kit – Includes 2/each magnetic saddles with 20 feet of #12 AWG solid wire, HMWPE insulation, 1/each, 2-part conductive epoxy kit (for 2 saddles) #4 Current Connection Kit - Includes 1/each magnetic saddle with a crimp connector for #4 AWG cable (supplied separately), 1/each, 2-part conductive epoxy kit (for 1 saddle) #6 Current Connection Kit - Includes 1/each magnetic saddle with a crimp connector for #6 AWG cable (supplied separately), 1/each, 2-part conductive epoxy kit (for 1 saddle) A Keyhole Applicator Tool is sold separately for use when installing the NotHot connector in a keyhole pipeline excavation. Easy Installation The NotHot connector is installed on prepared pipeline surface, which must be clean, bare metal.  The conductive epoxy is applied to the connector, which is placed on the pipeline surface.  The provided magnet holds the connector in place on the pipeline while the conductive epoxy dries.  The NotHot is a unique and effective way to install cathodic protection test lead wires or current carrying wires to a steel pipeline.  Product Name Product Includes Part No. Price Double Test Lead Kit 2 - Magnetic Test Lead Saddles with installed lead wire2 - #12 AWG solid wire, 20 ft. long, HMWPE insulation, installed on saddles1 - 2-part, epoxy kit for installation of two test lead saddles2 - Mixing cups with stir stick and installation instructions 03-20060 $354.00 #6 Current Connection Kit 1 - Magnetic Current Connection Saddle with #6 AWG crimp connector Note: #6 cable is sold separately, and field installed.1 - 2-part, epoxy kit for installation of one saddle2 - Mixing cups with stir stick and installation instructions 03-20052 $360.00 #4 Current Connection Kit 1 - Magnetic Current Connection Saddle with #4 AWG crimp connector Note: #4 cable is sold separately, and field installed.1 - 2-part, epoxy kit for installation of one saddle2 - Mixing cups with stir stick and installation instructions 03-20054 $360.00 Keyhole Applicator Tool Tool only to install saddles into small diameter "keyhole" excavations 03-20050 $298.00
img

This Premium Product is included in plans

£ 799.00 £ 999.00 20% off
Add to Cart

Related Modules

Pipeline Corrosion in World Wide

Signup for Newsletter