Pipeline Corrosion Control

DryConn Direct Bury Plus by King Innovations

Description Integrated twist-on wire connector with strain relief. Designed for direct burial. Waterproof and corrosion proof. One piece for easy installation. No additional wire connector needed. For use in low voltage wiring, including cathodic protection systems, test leads, tracer wire, landscape irrigation, landscape lighting, and golf. Specifications Max. Voltage: 50V Wire Type: Copper/Copper Wire Range: Min #18, Max #10 Sealant Temperature: -29°F to 250°F Overall connector Size: 1.75” x 2.28” A = 2.28", B = 1.05", C = 1.75", E = 0.70" Installation Instructions IMPORTANT: Turn off power before installing or removing connector. Product to be used in accordance with local and national codes. Strip #14 - #10 wires 5/8”. Strip #18 and #16 wires 11/16”. Align any frayed strands or conductors. Do not pre-twist. Hold stripped wires together with ends of insulation even. Lead stranded wire slightly. Push conductors firmly into connector and twist onto wire until tight. Do not over torque. Position conductors as shown in Figure A and close lid. Note: When installing #18 conductor, position to exit out same side. See Figure B. Do not reuse. 50V Wire Combinations 2-6 #18 2-4 # 12 1 #10 w/ 1-5 #16 2 #10 w/ 1-4 #18 2 #10 w/ 1 #12 1 #12 w/ 1-5 #14 2 #12 w/ 1-4 #14 2 #12 w/ 1-4 #18 3 #12 w/ 1-3 #16 5 #14 w/ 1 #16 3 #16 w/ 1-3 #18 2-6 #16 1-3 #10 1 #10 w/ 1-4 #14 2 #10 w/ 1-4 #16 1 #12 w/ 1-5 #18 2 #12 w/ 1-4 #18 1 #14 w/ 1-5 #18 2 #14 w/ 1-4 #16 4 #14 w/ 1-2 #18 1 #16 w/ 1-5 #18 4 #16 w/ 1-2 #18 2-6 #14 1 #10 w/ 1-5 #18 1 #10 w/ 1-3 #12 2 #10 w/ 1-2 #14 1 #12 w/ 1-5 #16 2 #12 w/ 1-4 #16 1 #14 w/ 1-5 #16 3 #14 w/ 1-3 #18 4 #14 w/ 1-2 #16 2 #16 w/ 1-4 #18 5 #16 w/ 1 #18 Ordering Guide Catalog # Selling Unit 63210 63225 63475 Bag of 2 Bag of 25 Box of 100